27.03.2012
we went too the river and did a foundation went 16,500 up and 8,200 across and put pegs in using a sledge hammer to make them plumb, then put down profile boards and made them go 90 degrees to make it square...then we hammer them to make all four parts square and level to put on string line for the floor plan...
tools we used for today was measuring tape,slegde hammer,string line, pegs and profiles hand hammers and nails.

this is a picture of us startingthe contour foundation plan...

this is a picture of doing a pile set up

this is a picture of us laying down this pegs and beams..

we were making sure everything was level and straight before starting to put on the string line..

we were making the piles straight and level to take level measurements

just a random picture of a pile

another 1 of the piles

a picture of the finished job of making up a pile

mark was showing us how to corectly put up a string line

the almost finished foundation layout

this photo shows that the sting line is corectly on and nice and tightly on

another photo of finished string line

string line in the centre



then after 12pm after we finished we tidyed up and left... then had lunch break for an hour...then come back to eshed and did blogs.